织物面料防水防油整理剂 三防整理剂 纺织防水剂 防水剂

防水防油整理剂

HOLPOSON®C8-PLUS

HOLPOSON®C8-PLUS 适用于涤纶、黏胶、棉等混纺织物的整理加工，可以改变纤维表面性能，使纤维表面由亲水性变为疏水性，赋予织物优良的防水防油功能，广泛应用于雨衣、帐篷、工作服面料的整理，经其整理后的面料，具有良好的透气性，且多次水洗后，依然具有良好的防水防油性能。

物化性能

外观 白色微黄液体

pH 6-7

含固量 约30%

离子性 阳离子

使用方法

1.浸轧法：

HOLPOSON®C8-PLUS 20～60g/L → 170℃ -180℃ 定型 × 1～3分钟

2.浸渍法：

防水防油整理剂 ECORING C8-PLUS 2 - 6%（o.w.f） → 170℃ 烘干 × 1～3分钟

产品性能

1、对部分纺织品有提升抗撕裂强度的功能。

2、HOLPOSON®C8-PLUS赋予棉等纤维素纤维、涤纶、尼龙及其混纺织物优良的防水性和防油性。

3、加工效果具有优良的耐久性，水洗后自然晾干后能够重新恢复良好的防水性。

注意事项

1.处理后的织物会有加深颜色的效果.请提前确认好加工后的成品颜色；

2.如若与其他助剂混合使用时，请务必提前通过实验确认效果，防止与其他助剂使用时发生冲突。

3.焙烘温度应尽可能的高，一般为170-180℃，若温度较低，则影响面料的防水效果。

4.在进行防水防油处理前，确认面料上是否处理了柔软剂其他助剂，否则会影响防水防油的效果。

贮 存

HOLPOSON®C8-PLUS 包装：60KG 塑料桶，贮存期为 12 个月。 室内存放，避免高温、严寒。

Waterproof and Oil-proof Finishing Agent

HOLPOSON®C8-PLUS

HOLPOSON®C8-PLUS is suitable for finishing polyester, viscose, cotton and other blended fabrics. It can change the surface properties of the fibers, make the surface of the fibers from hydrophilic to hydrophobic, and endow the fabrics with excellent waterproof and oil-proof functions. It is widely used in the finishing of raincoats, tents and work clothes. After finishing, the fabrics have good air permeability. After washing for many times, they still have good air permeability, waterproof and oil-proof performance.

Usage

1. Padding method：

HOLPOSON®C8-PLUS

20～60g/L,drying at 170℃ -180℃ for 1-3minutes.

2. Impregnation method：

HOLPOSON®ECORING C8-PLUS

2 - 6%（o.w.f），drying at 170℃ for 1～3minutes.

Characteristics

1. It can improve the tear strength of some textiles;

2. HOLPOSON®C8-PLUS gives cotton and other cellulose fibers, polyester, nylon and their blends excellent water and oil resistance;

3. The processing result has excellent durability. After being washed and dried, treated materials restore wash durability.

Attentions

1. The treated fabric will have deeper color. Please confirm the color of the finished product in advance;

2. If mixed with other auxiliaries, please confirm the effect through experiment in advance to prevent conflicts with other auxiliaries.

3. The baking temperature should be as high as possible, generally 170-180 ℃. If the temperature is low, the waterproof effect of the fabric will be affected.

4. Before the waterproof and oil-proof treatment, confirm whether the fabric is treated with softener and other auxiliaries, otherwise it will affect the waterproof and oil-proof effect.

重 要 声 明：以上数据和结果基于浙江福尔普生新型材料有限公司目前拥有的认识和经验,以及受限的实验室条件,仅供 参考，敬请客户根据自身条件通过试验加以确认。本公司不承担未经小样确认而投入生产所造成的损失！